IMV VM-0110 Vibration measuring ■Outline

VM-0110 is the multi-channel waveform data logging system that enables the complete simultaneous sampling up to max. 72-channel. Variable sampling rate enables to collect the stable temperature.humidity data for long time and the momentary data with short variable period as vibration pressure. The saved data can be analyzed with analysis software.

■Features

●Simultaneous measuring from 6 channel up to 72 channels. ●Detail setting of filter is possible ●High speed data transfer to PC by IEEE 1394 ●Accelerometer, Servo-type acceleration pickup, Piezoresistive pickup, and voltage output sensor are available with the change of input module. ●With loading PCMCIA card slot, data collection is possible to card-type HDD and compact flash. ●CARD BUS slot for data transfer by wireless transfer (planning) is equipped as standard.

■Function

■ Logging function It equips channel common setting, trigger setting, channel individual setting, analogue output setting to do the suitable measurement and enables the detailed measuring setting. Logging setting screen Logging screen ■ Analysis Function Versatile analysis as statistics analysis, waveform edition,spectrum analysis, inverse spectrum analysis, octave band analysis are possible. And file output function which enables the analysis by other maker's software is equipped. Waveform edit screen Spectrum analysis screen ■ Available Sensor 3-types of input module are selected according to the used sensor. These are 3-channel unit module. Versatile output type sensor (charge, voltage, current etc) can be connected and data as sound, pressure, current, temperature other than vibration is collected.

■System composition

■ Example

■VM-0110 Hardware

●Standard Function

Unit Function Content Description Basic Unit (VM-0110) See below. See below. See below. Measuring Unit Measuring Channel No. 6 channels Analogue input module x 2 loading Variable Digital Filter 6th butterworth LPF Set cut-off frequency from software Variable Gain Amplifier x1, x10, x100 Set by software (each channel individual) Sampling Rate Max. 102.4kHz/ch (at 12 channel logging) A/D Resolution 16bit   Monitor Signal Output Analogue voltage signal 1-channel selection by rotary switch Analogue Signal Output Analogue voltage signal Sinusoidal waveform (10～2kHz), M-series random waveform Base unit Host Interface IEEE1394 Communication with host PC Digital I/O Input x 2, Output x 2 Input (external trigger, synchronous signal), Output (synchronous signal) Card Slot PCMCIA x 1, Card bus slot x 1 Memory card for data recording Wireless card load (planing) Power Supply 24VDC 　 Power Consumption 60W At VD-0110x5 ,TYPE 1x12loading) Operation Environment 0 ～ +50℃ 　 Outer Dimensions 280W x 210H x 245Dmm At VD-0110x5 loading) without protrusion Weight 6.6kg approx. At VD-0110x5 loading)

●Optional Function

Unit Function Content Description Measuring Unit (VD-0110) See Measuring unit. See Measuring unit. Analogue signal output is nil due to expansion unit. Analogue Input Module See below. See below. See below. VA-0110C Pickup connect x 3 Accelerometer Frequency: 3～60kHz Max. Input: ±15,000pC/±150,000pC VA-0110S Pickup connect x 3 Servo or Piezo type acceleration pickup Frequency: DC/0.1～500Hz Max. Input: ±10V VA-0110X Connection cable General signal input x 3 Synchronous measurement signal I/O Voltage, current, Constant current drive PU. Connection of basic unit Frequency: 3～60kHz Max. Input: ±10V,0～20 mA, Drive current 3.5mA Synchronous measurement over 37ch Battery Battery drive Output 24V, 7.5Ah Continuous drive over 4hrs (At TYPE 1 x12, 36ch measurement) Card type memory Data save PCMCIA, Card-bus Save in this unit only On-line Setting Software [DS-0110HD] On-line measurement Logging condition setting by only this unit ― Host PC Note PC Windows2000 Check necessary software install and operation Communication Card IEEE 1394 I/F card IEEE 1394 communication cable is necessary

■VM-0110 Software

●Standard Function

Unit Function Content Description Logger [DS-0110R] Logging Channel No. Max. 72 channel ― Logging Operation One-shot.Continuous ― Trigger Function Level, external signal, Timer Single operation, repeat operation, Post trigger can be set Display Function Waveform, Compressed waveform, rms Converts to physical unit Memory Function Voice memo, text memo Sound function for PC is necessary for voice memo Logging Time Depends on HDD space 6ch, 1kS/s, 10MB consumes at 10min. Remote Control Function Control of VM-0110 unit Logging channel, Sampling rate, Amp (x1.10.100) range Analysis [DS-0110A] Time-series Waveform display Any zoom, auto-scale Select 1ch/6ch Time-series Waveform Edition Search function Peak value, threshold Calculation between cursor Max. value, min value, average value, rms, amplitude (p-p), time difference Differential.integral 1-time differential, 2-time differential, 1-time integral, 2-time integral DC process Delete, extract Calculation among channel ＋－×÷ Unit conversion function Default unit is setting unit at logging Any filter function High-pass, Low-pass, band-pass and band stop Envelope ― Zoom ― Frequency Axis Display Windows function Hanning+Hamming.Rectangular. Flat Top, Blackman etc Cursor function Frequency difference, Level difference Zoom function ― Frequency Analysis Spectrum Amplitude, power Mutual spectrum Cross-spectrum, transfer characteristic Coherence Octave band analysis Band width (1/1, 1/3, 1/6, 1/12), Logarithmic average process Voice Memo Recall Voice file recall Display of memo mark, reproduction of voice memo (needs wave file reproduction software) File Output Time-series waveform data, analysis data CSV file, F2 format file (for vibration test type) Printing Time-series waveform graph, analysis graph Screen printing Other Temperate save Save of environmental setting ―

■Application

深圳市捌零零贸易有限公司为你提供最好的质量和服务!
订购电话:0755-89812017 陈建伟 ERIC160@163.com